Custom Plastic Mold Making Built for Reliable Sampling, Production and Long-Term Performance
We develop plastic injection molds based on your drawings, 3D files, samples or product requirements -- with engineering review, manufacturability support and in-house trial capability to help reduce tooling risk from the start.
- ✓Tooling support from design review to mold trial
- ✓Built for precision parts, transparent parts and complex structures
- ✓Seamless transition from tooling to injection molding production
Service Scope
What We Provide in Mold Making & Tooling
Our tooling service is designed to support customers from early project evaluation through mold manufacturing, mold trial and optimization.
Mold Design Based on Drawings, Files or Samples
We develop custom molds based on 2D drawings, 3D files, physical samples or defined product requirements.
DFM & Manufacturability Review
We review structure, draft, wall thickness, parting line, undercuts and other factors that affect tooling and molding stability.
Tooling Manufacturing & Assembly
In-house mold machining, fitting, assembly and modification to support efficient development.
Mold Trial & Sample Validation
Trial molding is carried out to verify part structure, dimensions, appearance and mold performance.
Mold Adjustment & Optimization
If needed, we support mold corrections and optimization after trial to improve part quality and production readiness.
Tooling for Production Transfer
Molds are developed not just for sample approval, but with later production stability in mind.
Target Customers
Who This Tooling Service Is Designed For
Our mold making service is a fit for customers at different stages of product development and sourcing.
Discuss Your Project →Scenario 01
You already have finished drawings and need a mold supplier
We can review your files and build molds for sampling, pilot runs or production.
Scenario 02
You have a sample, but no complete tooling data yet
We can assess the part and develop a suitable tooling plan based on available information.
Scenario 03
Your design needs manufacturability review before tooling
We can support structure evaluation and DFM feedback before steel is cut.
Scenario 04
You want one supplier for tooling and injection molding
We can handle both mold development and later production in one workflow.
Workflow
Our Mold Development Process
A clear tooling process helps reduce delays, improve communication and make project progress easier to manage.
-
01
File / Sample Review
We review drawings, 3D files, samples and technical requirements.
-
02
DFM & Tooling Evaluation
We assess manufacturability, mold structure and project feasibility.
-
03
Quotation & Tooling Proposal
We provide pricing, lead time and tooling approach.
-
04
Mold Design & Manufacturing
Mold design, machining, fitting and assembly are carried out in-house.
-
05
Mold Trial & Sample Submission
Trial molding is used to verify part quality and mold function.
-
06
Mold Optimization & Production Preparation
Necessary adjustments are made before moving into stable production.
Engineering & DFM
Engineering Support Before Tooling Begins
A mold can only perform well if the part design is ready for tooling and molding. That is why early engineering review matters.
- ✓Wall thickness
- ✓Draft angle
- ✓Parting line feasibility
- ✓Undercuts & slider requirements
- ✓Gate position considerations
- ✓Shrinkage & deformation risk
- ✓Material suitability
- ✓Assembly-related features
This helps reduce tooling risk, avoidable mold revisions, unstable molding performance or delays during sample validation.
Learn More About Engineering & DFM SupportCapabilities
Tooling Capabilities for Different Part Structures and Requirements
We support mold development for a wide range of plastic part geometries, functions and production requirements.
High-Precision Structural Parts
Suitable for projects requiring dimensional accuracy and assembly consistency.
Transparent Part Tooling
Experience with mold requirements for transparent parts where surface quality matters.
Large Plastic Part Molds
Support for larger part sizes and molds requiring stable machining and processing control.
Complex Slider / Lifter Structures
Capability for parts with undercuts, side actions and more complex tooling structures.
Production-Oriented Mold Design
Tooling developed with later molding stability and maintainability in mind.
Single-Cavity and Multi-Cavity Tooling
Depending on project requirements, we can support different mold configurations.
In-House Resources
In-House Tooling Equipment and Manufacturing Resources
Our tooling workshop is equipped to support mold machining, fitting, trial preparation and mold correction under one internal process.
- 5-axis CNC
- Mirror EDM
- Wire cutting
- Grinding machines
- Milling machines
- Deep hole drilling
- CMM inspection equipment
With in-house machining and fitting resources, we are able to manage tooling quality, development timing and trial preparation more directly.
See Our Factory EquipmentQuality Control
Quality Control Throughout the Tooling Process
Tool quality affects not only sample approval, but also long-term molding consistency, maintenance efficiency and production reliability.
-
01
Dimensional verification during machining and fitting
-
02
Mold structure checks before trial
-
03
Trial molding validation for part performance
-
04
Sample inspection for dimensions and appearance
-
05
Mold correction and optimization if required
Inspection tools and measurement equipment are used to help confirm key dimensions and improve confidence before production transfer.
View Our Quality SystemRisk Prevention
Common Tooling Risks We Help You Address Early
Many tooling delays and extra costs come from issues that could have been identified earlier. Our engineering and tooling review helps reduce those risks.
Part structure not ready for tooling
How we help
We review manufacturability before production steel is cut.
Unexpected undercuts or difficult mold actions
How we help
We assess side actions, lifters and structural complexity early.
Warping, shrinkage or unstable molding behavior
How we help
We help evaluate risk factors related to design and material choice.
Mold built for samples, but not for stable production
How we help
We consider later production needs during tooling planning.
Portfolio
Selected Tooling Projects
Explore examples of custom molds developed for structural, appearance and functional plastic parts.
Precision Structural Part Mold
Tooling developed for stable dimensions and assembly performance.
Transparent Part Mold
Mold built with attention to surface quality and optical appearance.
Complex Undercut Structure Mold
Tooling solution developed for parts requiring slider/lifter actions.
FAQ
Frequently Asked Questions About Mold Making
Can you build molds from our 3D files or samples? +
Yes. We can develop molds based on 2D drawings, 3D files, physical samples or product requirements.
Do you provide DFM before mold manufacturing? +
Yes. We can support manufacturability review before tooling begins.
Can you do mold trial in-house? +
Yes. Mold trial and sample validation can be handled within our internal process.
Can you support mold modification after trial? +
Yes. If needed, mold correction and optimization can be arranged after trial evaluation.
Do you only make molds, or can you also handle injection molding production? +
We can provide both mold making and later injection molding production in one workflow.
What kind of parts are you experienced with? +
We are experienced with high-precision structural parts, transparent parts, large plastic parts and molds with complex slider/lifter structures.
Get Started
Ready to Start a New Mold Project?
Send us your drawing, 3D file, sample or project requirements. We can review manufacturability, propose a tooling approach and support your project from mold development to production.
OEM / ODM inquiries welcome · English communication supported
What to include in your inquiry
- 2D drawings or 3D CAD files (STEP / IGS / X_T)
- Physical sample or reference product
- Material, finish and tolerance requirements
- Annual volume forecast and target market
- Whether injection molding production is also required